Measurement

Visceral Fat: What Australia Actually Measures

Visceral fat is stored deep in the abdomen, around the organs. It carries more health risk than fat under the skin, and your waist is the simplest useful clue to it.

2 min readSources datedAustralia-wide

Key takeaways

Visceral fat sits around the organs inside the abdomen, not under the skin.
Australian guidance publishes no visceral fat threshold. It publishes waist thresholds: 94cm for men, 80cm for women.
Abdominal obesity rose from 25 per cent of adults in 1995 to 48 per cent in 2022 to 2024, while the BMI figure levelled off.
A smart scale estimates visceral fat from whole-body impedance. It does not measure it, and ratings do not compare across brands.

1. What visceral fat is, and what Australia measures instead

Visceral fat is fat stored around the organs inside the abdomen, as distinct from the fat stored under the skin. Australian clinical guidance does not publish a visceral fat threshold. What it publishes is a waist circumference threshold, which is the practical stand-in: 94cm for men and 80cm for women.

That distinction is the whole point of this page. A scan can measure visceral fat directly. A tape measure, a set of scales and a BMI calculator cannot. The honest thing is to say what each one is really telling you.

If weight, food or numbers start to feel hard

Food, weight and numbers can start to feel stressful. If that happens, tell your doctor or another health professional you trust. Free, confidential help is also there. Call the Butterfly Foundation National Helpline on 1800 33 4673, open 8am to midnight AEST, 7 days. Call Lifeline on 13 11 14, any hour.

  • Waist circumference, men — Increased risk: 94cm or more · Greatly increased risk: 102cm or more

  • Waist circumference, women — Increased risk: 80cm or more · Greatly increased risk: 88cm or more

These are the figures in the RACGP guidance on overweight and obesity, under the heading of waist size showing increased risk of chronic disease. The same thresholds appear in Healthdirect’s page on BMI and waist circumference.

RACGP describes waist measurement as a more direct measure of central obesity. It notes that BMI may be less accurate at assessing central adiposity in people with high muscle mass. Its guidance does not use the term visceral fat, and it sets no numeric visceral fat target.

So when a page quotes you a visceral fat level with a threshold attached, it is worth asking where that threshold was published. In Australian clinical guidance, it was not.


2. How many Australians are above the waist thresholds

  • All adults — Above the increased risk threshold: 67.9 per cent · Average waist: 95.1cm

  • Men, threshold 94cm — Above the increased risk threshold: 63.5 per cent · Average waist: 99.3cm

  • Women, threshold 80cm — Above the increased risk threshold: 72.1 per cent · Average waist: 91.0cm

Figures are from the Australian Bureau of Statistics release on waist circumference and BMI, drawn from the 2022 National Health Survey.

Read those averages against the thresholds above. The average Australian man measures 99.3cm against a 94cm threshold. The average Australian woman measures 91.0cm against an 80cm threshold. On this measure the national average sits above the threshold for both sexes.

For women the gap between average and threshold is 11cm, the widest of the three. That is also why the female figure for being above the threshold is the higher one, at 72.1 per cent. Women have the lower rate of overweight and obesity on BMI.


3. The trend BMI cannot see

This is the finding that makes the waist worth measuring even when you already know your BMI.

  • Adults with overweight or obesity, by BMI — 1995: 56 per cent · 2022 to 2024: 67 per cent

  • Adults with abdominal obesity, by waist — 1995: 25 per cent · 2022 to 2024: 48 per cent

From the AIHW media release of June 2026 accompanying its overweight and obesity report.

The BMI row rose to 67 per cent by 2017 to 2018 and then held steady. The waist row did not level off. Abdominal obesity nearly doubled and kept climbing through to 2024.

The same release breaks that down by age cohort, and the pattern is consistent.

  • 45 to 54 — Abdominal obesity, 2011 to 2012: 46 per cent · Abdominal obesity, 2022 to 2024: 55 per cent

  • 25 to 34 — Abdominal obesity, 2011 to 2012: 27 per cent · Abdominal obesity, 2022 to 2024: 36 per cent

A nine percentage point rise in both cohorts, over a period when the BMI figure was flat. Weight distribution kept shifting toward the abdomen while total weight did not change. A measure that reads only height and weight is blind to that by construction.


4. Why a body composition scale cannot measure visceral fat

Consumer scales that report a “visceral fat rating” are not measuring fat around your organs. They are estimating it.

Those scales work by passing a small current through the body. Lean tissue and fat carry that current differently, so the resistance gives a rough reading of body make-up. The scale then runs that reading through its own formula to produce a visceral number.

Several things follow from how that works.

  • The reading comes from the whole body, not from anything measured inside the abdomen

  • Hydration changes the result, so the same body reads differently before and after a drink or a workout

  • The formula is the manufacturer’s and is generally not published, so the number cannot be compared between brands

  • The rating scale is the manufacturer’s own, so there is no Australian threshold to read it against

None of that makes the number useless for watching a trend on one device. It does mean the figure is not a measurement of visceral fat. It also means a rating from one scale is not comparable to a rating from another.

Measuring it directly needs a scan: a CT, an MRI, or a DEXA scan that looks at the abdomen. A doctor arranges those. They are not home tools.


5. What to measure instead

A tape measure, used correctly, is the measure Australian guidance actually publishes thresholds for. It costs almost nothing and is more informative about central fat than either BMI or a scale’s visceral rating.

The waist measurement guide covers where to place the tape, when to measure, and the errors that make readings inconsistent. Those errors matter: a few centimetres of tape placement can move you across a threshold.

Three ratio measures add context to a raw waist figure.

RACGP guidance says waist measurement is used in adults with a raised BMI. It also says height, weight and BMI are assessed opportunistically rather than on a set schedule. Reading BMI and waist together is covered on the homepage, which gives the four-way read across both measures.

About this link. SHIFT is a doctor-led weight management service run by the same team that publishes this site. It pays for the site’s upkeep. It does not change your result, it does not see your measurements, and nothing you enter here is passed to it.

Who SHIFT can support. A doctor there decides what is appropriate; this site does not, and no result from this page is sent with you.


6. Sources

Every figure on this page is linked to the body that publishes it.

The full citation index for this site is on our sources.


Waist-to-Height Ratio

Assess abdominal-fat risk with a simple ratio.

cm
cm
0.50Increased risk

Example shown: height 170 cm, waist 85 cm. Change the numbers to see your own result.

This is a screening tool, not a diagnosis.